home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
User's Choice Windows CD
/
User's Choice Windows CD (CMS Software)(1993).iso
/
win_u_z
/
vd007.zip
/
VD007.TXT
< prev
Wrap
Text File
|
1992-11-17
|
6KB
|
157 lines
=================================================================
Microsoft Product Support Services ViewNote (Text File)
VD007: WORD FOR WINDOWS SETUP & TROUBLESHOOTING GUIDE
11/92
=================================================================
THE INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT
MAY ACCOMPANY THIS DOCUMENT (collectively referred to as a
ViewNote) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE. The user assumes the entire risk as to the
accuracy and the use of this ViewNote. This ViewNote may be
copied and distributed subject to the following conditions: 1)
If software is included, all files on the disk(s) must be copied
without modification (the MS-DOS [R] utility diskcopy is
appropriate for this purpose); 2) All components of this
ViewNote must be distributed together; and 3) This ViewNote
may not be distributed for profit.
Copyright (C) 1992 Microsoft Corporation. All Rights Reserved.
Microsoft and MS-DOS are registered trademarks, and Windows is a
trademark of Microsoft Corporation.
=================================================================
Summary
-------
ViewNotes are online documents designed to answer questions you
may have about Microsoft Windows-based products. To read this
ViewNote in Microsoft Multimedia Viewer, a program that allows
you to read .MVB files (online Viewer documents), follow the
instructions below. ViewNotes require Microsoft Windows operating
system version 3.0 or later.
FILES THAT MUST BE DOWNLOADED
-----------------------------
This ViewNote requires the following:
- VD007.MVB (the ViewNote)
- VD007.IND (the ViewNote index)
- MMVIEW.EXE (Microsoft Multimedia Viewer)
INSTALLATION
------------
Note: If you already have Microsoft Viewer (MMVIEW.EXE)
installed in your VIEWNOTE directory, skip to step 2.
To install Viewer (MMVIEW.EXE) and the files for this ViewNote
(VD007.MVB and VD007.IND), do the following:
Note: To save hard-disk space, you may prefer to copy this
ViewNote to a high-density floppy disk and run the ViewNote from
the floppy disk rather than running the ViewNote from your hard
disk). If this is the case, copy the MMVIEW.EXE, VD007.MVB,
and VD007.IND files to a floppy disk instead of to your VIEWNOTE
directory.
1. If you do not have a VIEWNOTE directory set up with
MMVIEW.EXE located in the directory, do the following to
install a read-only version of Viewer:
a. Create a directory by choosing Create Directory from the
File menu in File Manager, typing "viewnote" (without the
quotation marks) in the Name box, and choosing the OK
button.
b. Download Viewer (MMVIEW.EXE) from your bulletin board
service (for example, from the Microsoft Download Service
[MSDL], OnLine, CompuServe, or GEnie). MMVIEW.EXE can be
obtained from the Software/Data Library on CompuServe,
OnLine, and GEnie by searching for the word MMVIEW or
S13434. Note that MMVIEW.EXE is compressed in the file
MMVIEW.ZIP on CompuServe, OnLine, and GEnie. After the file
has been downloaded, you must decompress the file using the
PKware PKUNZIP utility.
Viewer (MMVIEW.EXE) can also be downloaded through the MSDL
at (206) 936-6735. Viewer is located in the Windows 3.1
file area and is in the self-extracting file MMVIEWER.EXE.
2. Follow the instructions below. For example, if you obtained
Viewer from MSDL, follow the instructions under the "MSDL
Users" heading.
MSDL Users
----------
After you have downloaded MMVIEWER.EXE, move it to your
VIEWNOTE directory or floppy disk. Because this file is
compressed, it needs to be expanded by typing the name of the
file (MMVIEWER) at an MS-DOS command prompt. (MMVIEW.EXE is
the expanded Viewer file used to read ViewNotes.) Also,
move VD007.MVB (the ViewNote) and VD007.IND to your VIEWNOTE
directory or floppy disk:
a. In File Manager, select the files you want to move.
b. From the File menu, choose Move.
c. In the To text box, enter the path to the VIEWNOTE
directory you created in step 1a.
d. Choose the OK button.
OnLine, CompuServe, GEnie Users
-------------------------------
After you have downloaded MMVIEW.EXE (and decompressed
it if you are using OnLine, CompuServe, or GEnie), move
MMVIEW.EXE, VD007.IND, and VD007.MVB (the ViewNote) to
your VIEWNOTE directory or floppy disk:
a. In File Manager, select the files you want to move.
b. From the File menu, choose Move.
c. In the To text box, enter the path to the VIEWNOTE
directory you created in step 1a.
d. Choose the OK button.
READING THIS VIEWNOTE
---------------------
To read the "Word for Windows Setup & Troubleshooting Guide"
ViewNote,
do the following:
1. After installing Viewer (MMVIEW.EXE), VD007.MVB, and
VD007.IND using the instructions above, run Windows
File Manager.
2. If you are running "Word for Windows Setup & Troubleshooting
Guide" from your hard disk, open the directory where Viewer,
VD007.MVB, and VD007.IND reside (the VIEWNOTE directory if you
followed the directions above) and double-click VD007.MVB.
If you are using a keyboard, select VD007.MVB and press ENTER.
-or-
If you are running "Word for Windows Setup & Troubleshooting
Guide" from a floppy disk, run MMVIEW.EXE, choose Open from the File menu
in Viewer, select VD007.MVB, and choose the OK button.
SETTING UP A VIEWER ICON
------------------------
If you set up a Viewer icon, you can run Viewer by choosing the
icon, and then load the ViewNote by choosing Open from the
File menu in Viewer, and selecting VD007.MVB from the VIEWNOTE
directory. To set up a ViewNote icon, create a program item for
Viewer. For information about creating a program item, see pages
78-81 of the "Microsoft Windows User's Guide" for Windows version
3.1 and pages 89-91 of the "Microsoft Windows User's Guide" for
version 3.0.